Pneumatic Linear Slide Actuator

Pneumatic Linear Slide Actuator

The company focuses on the platform supply of European industrial Pneumatic Linear Slide Actuator in China, specializing in providing European high-quality industrial products, complete sets of equipment and technical application services for manufacturing enterprises of steel, non-ferrous metals, electric power, petrochemical, mining, automotive, mechanical equipment, electrical instruments, food and beverage, rubber products, pharmaceutical, textile, paper, printing, cement, glass, environmental equipment, etc.    Through years of overseas hibernation, we have established a large and mature channel system in Europe, with Germany as the center.

The types and structures of the regulating mechanisms of pneumatic actuators are more or less the same, mainly the actuators are different. Therefore, the pneumatic actuator is divided into two parts: the actuator and the regulating valve when it is introduced. The pneumatic actuator consists of two parts: the actuator and the regulating valve (regulating mechanism). According to the size of the control signal, the corresponding thrust is generated to push the regulating valve to act. The regulating valve is the regulating part of the pneumatic actuator. Under the action of the actuator thrust, the regulating valve produces a certain displacement or turning angle to directly regulate the flow of fluid.

Pneumatic device mainly consists of cylinders, pistons, gear shafts, end caps, seals, screws, etc.; complete sets of pneumatic devices should also include openness indication, travel limits, solenoid valves, positioners, pneumatic components, manual mechanisms, signal feedback and other components.

The size of the connection between the pneumatic device and the valve should be in accordance with ISO5211 (bottom), GB/T12222 and GB/T12223.

3、With a manual mechanism of the pneumatic device, when the air source is interrupted, should be able to use its manual mechanism to open and close the pneumatic ball valve operation, facing the hand wheel, the hand wheel or handle should rotate counterclockwise for the valve open, clockwise rotation for the valve closed.

4、The end of the piston rod for internal and external threads, there should be a standard wrench applicable wrench mouth.

5、The seal of the piston should be easy to replace and overhaul.

pneumatic device

6、With the buffer mechanism of the pneumatic device, the length of the stroke of the buffer mechanism can be referred to the provisions of "Table 1".

7、With adjustable buffer mechanism of the pneumatic device, there should be external cylinder to adjust the buffer role of the mechanism.